Interlocked Rough Bore Dimensions
PHL-100(S/G)
|
||
|---|---|---|
| Hose I.D. | Inside Bend Radius Minimum | WT. Per Foot Approx. |
| Inches | ||
| 1″ | 5.75″ | 0.35 |
| 1-1/8″ | 6.00″ | 0.38 |
| 1-1/4″ | 6.25″ | 0.40 |
| 1-3/8″ | 6.50″ | 0.45 |
| 1-1/2″ | 6.75″ | 0.50 |
| 1-3/4″ | 7.00″ | 0.57 |
| 1-7/8″ | 7.25″ | 0.61 |
| 2″ | 7.50″ | 0.65 |
| 2-1/4″ | 7.80″ | 0.75 |
| 2-1/2″ | 8.50″ | 0.80 |
| 3″ | 10.00″ | 1.00 |
| 3-1/2″ | 10.50″ | 1.10 |
| 4″ | 14.50″ | 1.40 |
| 4-1/2″ | 16.50″ | 1.50 |
| 5″ | 18.00″ | 1.70 |
| 5-1/2″ | 20.00″ | 1.85 |
| 6″ | 22.00″ | 2.00 |
| 7″ | ||
| 8″ | ||
| 9″ | ||
| 10″ | ||
| 11″ | ||
| 12″ | ||
| 13″ | ||
| 14″ | ||
| 15″ | ||
| 16″ | ||
PHM-150(S/G)
|
||
|---|---|---|
| Hose I.D. | Inside Bend Radius Minimum | WT. Per Foot Approx. |
| Inches | ||
| 1″ | 6.40″ | 0.40 |
| 1-1/8″ | 6.50″ | 0.45 |
| 1-1/4″ | 6.60″ | 0.51 |
| 1-3/8″ | 6.70″ | 0.63 |
| 1-1/2″ | 6.90″ | 0.75 |
| 1-3/4″ | 7.00″ | 0.87 |
| 1-7/8″ | 7.50″ | 0.95 |
| 2″ | 8.00″ | 1.00 |
| 2-1/4″ | 9.00″ | 1.10 |
| 2-1/2″ | 10.00″ | 1.21 |
| 3″ | 12.00″ | 1.45 |
| 3-1/2″ | 16.50″ | 1.70 |
| 4″ | 18.00″ | 1.95 |
| 4-1/2″ | 19.00″ | 2.15 |
| 5″ | 19.50″ | 2.40 |
| 5-1/2″ | 21.50″ | 2.70 |
| 6″ | 26.50″ | 2.90 |
| 7″ | 26.50″ | 3.35 |
| 8″ | 27.00″ | 3.80 |
| 9″ | 28.00″ | 4.25 |
| 10″ | ||
| 11″ | ||
| 12″ | ||
| 13″ | ||
| 14″ | ||
| 15″ | ||
| 16″ | ||
PHH-200(S/G)
|
||
|---|---|---|
| Hose I.D. | Inside Bend Radius Minimum | WT. Per Foot Approx. |
| Inches | ||
| 1″ | ||
| 1-1/8″ | ||
| 1-1/4″ | ||
| 1-3/8″ | ||
| 1-1/2″ | 7.50″ | 0.95 |
| 1-3/4″ | 7.60″ | 1.10 |
| 1-7/8″ | 7.70″ | 1.15 |
| 2″ | 7.80″ | 1.25 |
| 2-1/4″ | 8.85″ | 1.40 |
| 2-1/2″ | 9.70″ | 1.53 |
| 3″ | 11.70″ | 1.82 |
| 3-1/2″ | 12.20″ | 2.11 |
| 4″ | 14.15″ | 2.45 |
| 4-1/2″ | 16.00″ | 2.70 |
| 5″ | 17.80″ | 2.99 |
| 5-1/2″ | 19.50″ | 3.29 |
| 6″ | 21.00″ | 3.60 |
| 7″ | 24.50″ | 4.20 |
| 8″ | 27.50″ | 4.65 |
| 9″ | 27.75″ | 5.20 |
| 10″ | 28.00″ | 5.80 |
| 11″ | 31.00″ | 6.90 |
| 12″ | 34.00″ | 6.95 |
| 13″ | 38.00″ | 7.10 |
| 14″ | 42.00″ | 8.10 |
| 15″ | 45.00″ | 8.70 |
| 16″ | 48.00″ | 9.25 |
PHXH-250(S/G)
|
||
|---|---|---|
| Hose I.D. | Inside Bend Radius Minimum | WT. Per Foot Approx. |
| Inches | ||
| 1″ | ||
| 1-1/8″ | ||
| 1-1/4″ | ||
| 1-3/8″ | ||
| 1-1/2″ | ||
| 1-3/4″ | ||
| 1-7/8″ | ||
| 2″ | 8.30″ | 1.65 |
| 2-1/4″ | 9.50″ | 1.80 |
| 2-1/2″ | 10.00″ | 2.00 |
| 3″ | 12.50″ | 2.40 |
| 3-1/2″ | 12.75″ | 2.80 |
| 4″ | 14.50″ | 3.20 |
| 4-1/2″ | 16.50″ | 3.53 |
| 5″ | 18.10″ | 3.95 |
| 5-1/2″ | 21.55″ | 4.33 |
| 6″ | 25.00″ | 4.70 |
| 7″ | 29.25″ | 5.50 |
| 8″ | 32.10″ | 6.25 |
| 9″ | 33.60″ | 6.62 |
| 10″ | 35.00″ | 6.98 |
| 11″ | 39.50″ | 7.37 |
| 12″ | 42.00″ | 7.75 |
| 13″ | 45.50″ | 8.53 |
| 14″ | 49.00″ | 9.30 |
| 15″ | 52.50″ | 9.98 |
| 16″ | 56.00″ | 10.65 |
* Strip thickness of 0.030″ and 0.035″ available upon request
** All dimensions are based on the hose in the extended position and all weights are approximate
*** Hose is manufactured with type 304 stainless steel strip
**** Specify S for stainless steel or G for galvanized after part number, I.E., PHL-100S for 0.010″ stainless steel strip
Packing Availability
| TYPE PACKING | PRESSURE RANGE | VACUUM | TEMPERATURE |
|---|---|---|---|
| COTTON | UP TO 15 PSI | UP TO 15" MERCURY | 300 F |
| STAINLESS WIRE | UP TO 15 PSI | UP TO 15" MERCURY | 1500 F |
| APYROUS | UP TO 15 PSI | UP TO 15" MERCURY | 450 F |
| ELASTOMERIC | UP TO 20 PSI | UP TO 20" MERCURY | 180 F |
